HIGH DENSITY 19.2W/m MONO COLOR
Internal Reference:High density (240 LED/m ) high CRI LED strip for special applications with standard lumen requirements.
Suitable for low depth profiles with minimum point spot effect.
24V DC
CRI90+
IP43 for indoor use only.
Can be cut and re-soldered every 2.5cm (6 LEDs).
Supplied in 5m reel package, can be extended up to maximum 10m
Share this product:
| Input Voltage | 24V DC |
| Output lumen max | 2200lm/m |
| Output Power max | 19.2W/m |
| LED density | 240/m |
| Width | 10mm |
| Cut lenght | 2.5cm |
| CRI | 90+ |
| Optic angle | 120° |
| LED chip type | Osram 2216 |
| IP | 43 |
| Working temperature | -35/60° |
| Warranty | 2 years |
|
Electrical Properties
|
|
|---|---|
| Input Voltage | 24V DC |
|
Definitive Properties
|
|
| Color Temperature | 2700K or 3000K or 4000K |
| Channels | Single |
| IP | 43 |
![[ILED-1CHAN100] Single Color 1CH Controller](/web/image/product.product/502/image_1920)
![[ILED-MONOAMP10] Single Color RF Amplifier](/web/image/product.product/504/image_1920)
![[ILED-MONODIM10] Single Color RF Remote Controller](/web/image/product.product/506/image_1920)
![[ILED-RFRMT1] Single Color RF Remote](/web/image/product.product/505/image_1920)
![[ILED-XDIMMER] Single Color Multi Protocol Dim (DMX/0-10V/1-10V)](/web/image/product.product/503/image_1920)
![[SPTR-SLDR-BUT52] Solder Butane](/web/image/product.product/508/image_1920)
![[SPTR-SLDR-SP125] Solder Iron on Gas](/web/image/product.product/533/image_1920)
![[SPTR-SLDR-TIN10] Solder](/web/image/product.product/532/image_1920)
![[SPTR-SLDR-WICK7] Desolder Wick](/web/image/product.product/245/image_1920)
![[SPTR-SNAP-HUB4] Connector SNAP hubs (4-hub)](/web/image/product.product/126/image_1920)
![[SPTR-SNAP-HUBY] Connector SNAP hubs (Y-hub)](/web/image/product.product/125/image_1920)
![[SPTR-SNAP-PLUG] Connector SNAP plugs](/web/image/product.product/139/image_1920)
![[SPTR-SNAPT2] Connector SNAP clamp T2](/web/image/product.product/124/image_1920)