Cable 4G0.5 RGB
              You can solder this cable to the RGB LED strip of a plug and use it to connect multiple strips over a distance.

              Price per m.
              Heat Shrinkable Tubing Black
              HIS-3 BAG heat shrink tubing can be used to insulate and protect cabling.

              Heat shrink tubing made from cross-linked polyolefin.
              Practical blister, content 10 lengths of 200 mm, pre-cut.
              Shrink ratio 3:1
              Premium Vinyl Electrical Tape 19mm x 20m Black
              Primary isolation of taps up to 1 kV. Protective outer sheath for taps in the low, medium and high voltage range.
              Applicable for insulating, protecting, bundling, marking.
              Excellent resistance to abrasion, moisture, chemicals, corrosion and UV exposure.
              For both indoor and outdoor use (all-weather).

              Size 19mm x 20m per roll packed in a plastic box.

              Width (W) 19mm
              Thickness (T) 0.18mm
              Length (L) 20m
              Connector SNAP clamp T2
              Fast connecting terminal blocks (not sealed) in T for two core wire. Easy and quick to work with. No need to strip cables.
              Connector pierces through flexible cable sleeve. Only to be used with flexible cables with a maximum wire section of 0.75mm.

              Packed per 5pcs.
              Connector IP68 Double max. 3G1.5
              IP 68 connector (for waterproof connections) based on two-component silicone GEL, factory-filled and therefore ready to use. Waste-free, easy and practical to use.
              Reliability guaranteed.

              • Electrical specifications 250V 10A.
              • Minimum and maximum outside diameter of cables 8 – 10 mm.
              • Connector suggested for cables with section up to 3 x 1,5 sqmm.
              Connector IP68 T max. 3G2.5
              IP 68 connector (For waterproof connections) based on two-component silicone GEL, factory-filled and therefore ready to use. Waste-free, easy and practical to use. Reliability guaranteed.

              • Electrical specifications 250V 16A.
              • Connector suggested for cables with section up to 3 x 2,5 sqmm on the line and up to 3 x 1,5 sqmm on the derivation.
              • Minimum and maximum outside diameter of cables 6,5-12 mm (line) – 5,5-10 mm (derivation).
              Connector IP68 H max. 4G1.5
              IP68 connector (for waterproof connections) based on two-component silicone GEL, factory-filled and therefore ready to use. Waste-free, easy and practical to use. Reliability guaranteed.

              • Electrical specifications 250V 10A
              • Minimum and maximum outer diameter of cables 6.5 – 12 mm.
              • Connector recommended for cables with a cross section up to 4 x 1.5 m².
              • Also suitable for 4 cable connection (RGB).
              Connector IP68 Straight max. 3G1.5
              IP 68 connector (for waterproof connections) based on two-component silicone GEL, factory-filled and therefore ready to use. Waste-free, easy and practical to use. Reliability guaranteed.

              • Electrical specifications 250V 16A.
              • Minimum and maximum outside diameter of cables 6,5 – 12 mm.
              • Connector suggested for cables with section up to 3 x 1,5 sqmm.
              Adhesive Insulation Pads
              Foam Adhesive pads 12x26mm.
              Packed per 50pcs.
              Suitable for insulating LED strip connections on the profile side.
              New Product
              Connector JST SM Smart Click
              JST SM-connectors match perfectly with LED strips. They also make an excellent general purpose connector for any project. Each set comes with one male and one female connector. The wire leads are 9cm long and terminated with a JST SM-connector on one end and bare tinned wire on the other.

              Packed per 5pcs.
              Connector SNAP hubs
              Snap cable hubs and plugs are easy and quick to use, without soldering or stripping wire.
              Connect multiple pieces of ledstrip to a hub, or use the plugs to connect pieces to each other quickly and reliably.
              New Product
              Connector sealed 3M Scotchlok
              3M™ Scotchlok™ 314 IDC Pigtail Electrical Connector is self-stripping, flame retardant and moisture resistant, with a unique 'U' contact that provides a fast and reliable electrical connection.

              Provide a moisture resistant, flame retardant electrical connection for two or three wire ends with 3M™ Scotchlok™ IDC connector 314 Our connector has a unique 'U' contact that provides a fast and reliable electrical connection that can be terminated without stripping or to turn. For connection of 0.5 mm² to 1.5 mm² wires. The spring connection is created by pushing the U contact down into the connector. The U contact pressed into the connector grips the conductors as it displaces the insulation.

              Pack of 10 pcs.
              Connector SNAP plugs
              Snap cable hubs and plugs are easy and quick to use, with no soldering or stripping of wire.
              Connect multiple pieces of LED strip to a hub, or use the plugs to quickly connect pieces together.

              The plastic is very sturdy, and the design is simple and handy, making a very strong connection.

              This connector can be used with solid and stranded wire.

              Packed per 10pcs.
              Cable 3G0.75 & 5G0.75 Transparant Multi-core
              Cable in FEP + PVC Transparent/Clear round section, with 3 or 5 cores (DALI or 0-10V).
              Diameter 5mm and 6.35mm respectively.
              Suitable for visible connection of fixtures such as pendant devices.
              Strands are swiss tinned copper.

              Price per m.