Shop
              11 items found.
              24V DALI Dim High Efficiency PSU
              Suitable for LED strips in all outdoor applications.
              Suitable for hazardous location LED applications.
              Suitable in dry, damp and wet location.
              DALI control technology.
              High power and high efficiency (up to 92%).
              Protections against short circuit, over current, over voltage and over temperature.
              Metal case with IP67 level.
              5 years warranty.
              Bestseller
              250/.../700mA 20W DALI DIM PSU
              Multipower/multiuse driver with DALI control.
              Maximum output power can be selected with an onboard dip-switch.
              IP20 for indoor use only.

              10W 250mA
              15W 350mA
              17W 400mA
              19W 450mA
              20W 500mA
              20W 550mA
              20W 600mA
              20W 700mA

              24V 16W

              Dimension: 111x52x22mm
              3 years warranty.
              24V 75/.../240W 0-10V Dimmable High Efficiency PSU
              Power supply with direct dim control connection 0-10V.
              Suitable for LED strips in all indoor and outdoor applications.
              Suitable for hazardous location LED applications.
              Suitable in dry, damp and wet location.
              0-10V, 1-10V PWM and 100K resistance control technology.
              High power and high efficiency (up to 92%).
              Protections against short circuit, over current, over voltage and over temperature.
              Metal case with IP67 level.
              5 years warranty.
              1CH 8A DALI/PUSH/0-10V DIM DIN
              1 channel dimmer.
              Extended input voltage 12/24/48 Vdc with maximum output current 8A, controls power up to 312W (at 48V).
              LOCAL Command: N.O. push button (with or without memory), 0-10V, 1-10V, Potentiometer, DALI.
              Typical efficiency > 95%.
              Adjusting the brightness up to completed off (Dim to dark).
              Level minimum of brightness: 0.1% (1% in push).
              Adjusting output curve: Linear / Quadratic / Exponential.
              Soft start and soft stop.
              DALI to Phase-Cut 220V DIM
              DALI trailing-edge phase dimmer.
              Dimming of many common dimmable line voltage LED lamps.
              Standby power consumption: < 0.5 W.
              DALI control signal.
              Short-circuit protection, overload protection,
              0vertemperature protection: electronically reversible.
              Device fits also for special applications where dimming below 1 % is required.
              Max. cable length to lamp/LED module 100 m.
              500mA 20W DALI LED PSU
              DALI dimmable LED Driver for constant current 500 mA
              Average service life 50,000 h
              Operating ambient temperature -20°C - +50°C

              Protection:
              1. Short- & open circuit proof
              2. Overload protection
              3. Overheat protection
              DALI relay 8A
              DALI RM8/RM16 provides a via DALI bus controllable relay switch, which allows direct switching of permanent loads up to 2kW.

              The purposeful switching in voltage zero crossings, enables an increase of the device lifetime.
              350/.../1050mA 25W Dali PSU
              Independent dimmable constant current LED driver with strain-relief
              ● Dimmable via DALI / DALI-2
              ● Output current adjustable between 350 – 1,050 mA
              ● Max. output power 25 W
              ● Up to 90 % efficiency
              ● Power input on stand-by < 0.15 W
              ● Nominal lifetime up to 100,000 h
              ● 5 years guarantee
              ● Type of protection IP20
              ● Suitable for emergency escape lighting systems acc. to EN 50172
              ● For cable cross-sections up to 2.5 mm²

              Interfaces :
              ● one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
              ● ready2mains (configuration and dimming via mains)
              ● Terminal blocks: 0° / 45° push terminals (input / output)
              ● Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)

              Protective features :
              ● overtemperature
              ● short-circuit, overload, no-load, input voltage range, reduced surge amplification
              DALI to Phase-Cut 220V DIM 10-300W
              DALI trailing edge phase dimmer 10-300W 86458619-300U.
              Dimming possible of several dimmable phase dim LED retrofit lamps. No halogen lamps!
              Minimum load 10W.
              Maximum load 300W.
              Suitable for resistive, inductive and capacitive loads. By self-detection device after connecting load.
              DALI control signal consumption in standby 6mA.
              Short-circuit protection, overload protection, over-temperature protection.
              Minimum dimming level 3 %.
              max. cable length to the lamp 50 m.
              Size: 120x30x22mm.
              DALI to Phase-Cut 220V DIM 3-25W
              DALI trailing edge phase dimmer 3-25W 86458619-25U.
              Dimming possible of several dimmable phase dim LED retrofit lamps. No halogen lamps!
              Minimum load 3W.
              Maximum load 25W.
              Suitable for resistive, inductive and capacitive loads. By self-detection device after connecting load.
              DALI control signal consumption in standby 6mA.
              Short-circuit protection, overload protection, over-temperature protection.
              Minimum dimming level 3 %.
              max. cable length to the lamp 50 m.
              Size: 32,5x15x58,5mm.
              350/.../1050mA 25W Dali PSU Compact
              Independent dimmable constant current LED driver with strain-relief
              ● Dimmable via DALI / DALI-2
              ● Output current adjustable between 350 – 1,050 mA
              ● Max. output power 25 W
              ● Up to 90 % efficiency
              ● Power input on stand-by < 0.15 W
              ● Nominal lifetime up to 100,000 h
              ● 5 years guarantee
              ● Type of protection IP20
              ● Suitable for emergency escape lighting systems acc. to EN 50172
              ● For cable cross-sections up to 2.5 mm²

              Interfaces :
              ● one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
              ● ready2mains (configuration and dimming via mains)
              ● Terminal blocks: 0° / 45° push terminals (input / output)
              ● Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)

              Protective features :
              ● overtemperature
              ● short-circuit, overload, no-load, input voltage range, reduced surge amplification